Send Message
Wuxi Grace Environmental Technology CO,.LTD
products
products
Home > products > DOC Diesel Oxidation Catalyst > CO THC NO2 NOx Removal CDPF Catalyst Used In Doc Continuous Passive Regeneration

CO THC NO2 NOx Removal CDPF Catalyst Used In Doc Continuous Passive Regeneration

Product Details

Place of Origin: Jiangsu-China

Brand Name: Grace

Certification: ISO9001/ISO14001

Model Number: G-7073

Payment & Shipping Terms

Minimum Order Quantity: 50 PCs

Price: $20/piece-$100/piece

Packaging Details: wooden box, Carton+Palletize

Delivery Time: 10-30days

Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram

Get Best Price
High Light:

CDPF Catalyst Used In Doc

,

NOx Removal Catalyst

,

NOx Removal CDPF Catalyst

Material:
Ceramic
Color:
White
Size:
Complete In Size. Accept Customization
Shape:
Round
Application:
Used In Diesel Engines
Product Name:
DOC Catalyst
Package:
Carton+Palletize
Sample:
Provide Samples.
Cell Density:
100/200/300/400/600cpsi
Shipping Type:
Express Delivery. Sea, Land And Air Transport.
Feature:
DOC Has Good Oxidation Performance, Low Light-off Temperature For HC, CO And SOF, And High Conversion Efficiency
Emission Standard:
Euro 2/3/4/5/6 , EuroⅡ/Ⅲ/Ⅳ/Ⅴ/Ⅵ
Material:
Ceramic
Color:
White
Size:
Complete In Size. Accept Customization
Shape:
Round
Application:
Used In Diesel Engines
Product Name:
DOC Catalyst
Package:
Carton+Palletize
Sample:
Provide Samples.
Cell Density:
100/200/300/400/600cpsi
Shipping Type:
Express Delivery. Sea, Land And Air Transport.
Feature:
DOC Has Good Oxidation Performance, Low Light-off Temperature For HC, CO And SOF, And High Conversion Efficiency
Emission Standard:
Euro 2/3/4/5/6 , EuroⅡ/Ⅲ/Ⅳ/Ⅴ/Ⅵ
CO THC NO2 NOx Removal CDPF Catalyst Used In Doc Continuous Passive Regeneration

Continuous Passive Regeneration DOC+CDPF Catalyst Remove CO/THC / NO2/NOx

 

 

Product Description

 

 

 

CDPF relies on the extremely high oxidizability of NO2 to realize its continuous passive re-production Health; The reaction speed of SCR under different NOx components is different, and it is increased appropriately NO2 is beneficial to speed up the reaction, and the ideal NO:NO2 ratio is 1:1, because This NO2 content is very important for downstream CDPF and SCR performance, in order to be more Compare the effects of DOC with different formulas on post-processing system, and compare DOC with doc The average NO2/NOx ratio after CDPF and after CDPF were counted. It can be seen that the average NO2/NOx ratio after CDPF is higher than that after DOC Average NO2/NOx after DOC and CDPF under different DOC formulations The difference of the ratio is not the same. When the precious metal load is large, the difference is larger Small, when the precious metal load is small, the difference increases with the high Pt/Pd ratio And decrease. NO will occur in the precious metal coating area of the deep bed of the particulate trap The oxidation reaction is in the high concentration area of NO2, and NO2 and soot in the cake layer The reaction occurs in the low concentration area of NO2, and the concentration difference of NO2 will drive NO2 Diffusion, passive regeneration of multiple reactions, if used for particles Oxidation of NO2 consumption is less than NO2 production, NO2 after CDPF Increase in concentration. When DOC adopts high precious metal loading or high Pt/Pd ratio, The formula, into the CDPF NO2 concentration is high, on the one hand, due to NO2 Diffusion, may adhere to the active site of precious metals, and adsorb NO to form a Set the inhibition, on the other hand for NO+O2=NO2 reaction, increase NO concentration is beneficial to increase the chemical reaction rate. This phenomenon shows that although High NO2 concentration after DOC is beneficial to oxidation of particulate matter in CDPF, but CDPF The noble metal in the can also continue to oxidize NO, so it is not necessary to obtain high NO2 to excessively increase the precious metal coating amount of DOC.

 

 

Category Active DOC Passive DOC Active and passive DOC
Substrate Ceramics, metals Ceramics, metals Ceramics, metals
Mesh/wall thickness 300/5,8 400/4,6 300/5,8 300/5,8 400/4,6
precious metal Pt,Pd Pt Pt,Pd
Airspeed is recommended 40,000-120,000 40,000-80,000 40,000-120,000
Sulfur content in oil products <50ppm <500ppm <50ppm
Recommended temperature <750C <550C <650C


 

 

 

Company Information

 

 

Grace Environmental Protection Technology Co., Ltd. is a technical enterprise specialized in various types of exhaust gas treatment. The team has rich internal combustion engine exhaust gas and VOC treatment experience and more than ten years of working experience, and is a very few suppliers with the ability to design the whole process from catalyst to overall solution. At present, the products cover all kinds of exhaust catalysts, DOC,CDPF,SCR,ASC, etc. At the same time, they cover waste liquid treatment and indoor air purification, providing customers with the most competitive products and services. At present, the company has passed the certification of ISO14001 environmental management system, ISO9001 international quality certification, AAA enterprise credit rating and other certifications, and has an annual output of 500,000 litres of catalyst production coating line, complete quality management system and process control. Various performance testing capabilities, including SRD,SRF,ICP,BET, etc.!


CO THC NO2 NOx Removal CDPF Catalyst Used In Doc Continuous Passive Regeneration 0
 
 
Packaging & Shipping
 
 
CO THC NO2 NOx Removal CDPF Catalyst Used In Doc Continuous Passive Regeneration 1
 
 

FAQ

 

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons Or wooden cases and foam. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CRF, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.