SIC Diesel Particulate Filter For Diesel Engine Exhaust System

Product Description

• The exhaust flow resistance of honeycomb ceramic particle trap filter element is mainly proportional to the thickness of particle layer deposited on the filter element surface. The larger the filtration area per unit volume, the slower the growth of particle layer thickness and flow resistance. From this point of view, the greater the honeycomb density of the filter element, the better, and the thinner the channel wall thickness, the better. However, the honeycomb density is too high and the channel is too small, so the accumulated particles will increase the exhaust flow resistance and even block the channel. Therefore, the passage of the filter element cannot be made too small.
• The micropores of particle traps are usually micron-sized, which is much larger than that of soot particles. Therefore, micropores can not directly purify, but through other mechanisms, including diffusion mechanism, interception mechanism, inertial collision mechanism and gravity deposition mechanism.
• Diffusion mechanism means that after the trapped particles appear in the flow field, the trapped particles converge on the rest particles, resulting in the concentration gradient of particle distribution, which leads to the diffusion and transportation of particles, and finally leads to the diffusion and capture of particles.
• Interception mechanism means that particles with a diameter greater than or equal to the diameter of the micropore of the filter element are captured when approaching the filtering surface.
• Inertial collision mechanism means that when the exhaust gas flows through micropores, the streamline bends, but because the mass of particulate matter is much larger than that of gas micelles, it hits the filter surface of the filter element and is trapped.
• Gravity deposition mechanism refers to the phenomenon that particles are trapped near the filter surface under the action of gravity, but because of the small mass of particles and the fast exhaust velocity, the influence of gravity deposition is often ignored.
• In the working process of DPF, the properties of particulate matter, exhaust flow rate, temperature, DPF specifications and material characteristics have important influence on the collection efficiency of DPF.

2. GRACE   DPF general specifications

Company Information

Grace Environmental Protection Technology Co., Ltd. is a technical enterprise specialized in various types of exhaust gas treatment. The team has rich internal combustion engine exhaust gas and VOC treatment experience and more than ten years of working experience, and is a very few suppliers with the ability to design the whole process from catalyst to overall solution. At present, the products cover all kinds of exhaust catalysts, DOC,CDPF,SCR,ASC, etc. At the same time, they cover waste liquid treatment and indoor air purification, providing customers with the most competitive products and services. At present, the company has passed the certification of ISO14001 environmental management system, ISO9001 international quality certification, AAA enterprise credit rating and other certifications, and has an annual output of 500,000 litres of catalyst production coating line, complete quality management system and process control. Various performance testing capabilities, including SRD,SRF,ICP,BET, etc.!

Packaging & Shipping

Certifications

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons Or wooden cases and foam. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CRF, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.